3D-bioprinted alginate-based bioink scaffolds with ß-tricalcium phosphate for bone regeneration applications.

Background/purpose: 3D-printed bone tissue engineering is becoming recognized as a key approach in dentistry for creating customized bone regeneration treatments fitting patients bone defects requirements. 3D bioprinting offers an innovative method to fabricate detailed 3D structures, closely emulating the native bone micro-environment and better bone regeneration. This study aimed to develop an 3D-bioprintable scaffold using a combination of alginate and ß-tricalcium phosphate (ß-TCP) with the Cellink® BioX printer, aiming to advance the field of tissue engineering. Materials and methods: The physical and biological properties of the resulting 3D-printed scaffolds were evaluated at 10 %, 12 %, and 15 % alginate combined with 10 % ß-TCP. The scaffolds were characterized through printability, swelling behavior, degradability, and element analysis. The biological assessment included cell viability, alkaline phosphatase (ALP) activity. Results: 10 % alginate/ß-TCP 3D printed at 25 °C scaffold demonstrated the optimal condition for printability, swelling capability, and degradability of cell growth and nutrient diffusion. Addition of ß-TCP particles significantly improved the 3D printed material viscosity over only alginate (P < 0.05). 10 % alginate/ß-TCP enhanced MG-63 cell's proliferation (P < 0.05) and alkaline phosphatase activity (P < 0.001). Conclusion: This study demonstrated in vitro that 10 % alginate/ß-TCP bioink characteristic for fabricating 3D acellular bioprinted scaffolds was the best approach. 10 % alginate/ß-TCP bioink 3D-printed scaffold exhibited superior physical properties and promoted enhanced cell viability and alkaline phosphatase activity, showing great potential for personalized bone regeneration treatments.

Fabrication and properties of PLA/ß-TCP scaffolds using liquid crystal display (LCD) photocuring 3D printing for bone tissue engineering.

Introduction: Bone defects remain a thorny challenge that clinicians have to face. At present, scaffolds prepared by 3D printing are increasingly used in the field of bone tissue repair. Polylactic acid (PLA) has good thermoplasticity, processability, biocompatibility, and biodegradability, but the PLA is brittle and has poor osteogenic performance. Beta-tricalcium phosphate (ß-TCP) has good mechanical properties and osteogenic induction properties, which can make up for the drawbacks of PLA. Methods: In this study, photocurable biodegradable polylactic acid (bio-PLA) was utilized as the raw material to prepare PLA/ß-TCP slurries with varying ß-TCP contents (ß-TCP dosage at 0%, 10%, 20%, 30%, 35% of the PLA dosage, respectively). The PLA/ß-TCP scaffolds were fabricated using liquid crystal display (LCD) light-curing 3D printing technology. The characterization of the scaffolds was assessed, and the biological activity of the scaffold with the optimal compressive strength was evaluated. The biocompatibility of the scaffold was assessed through CCK-8 assays, hemocompatibility assay and live-dead staining experiments. The osteogenic differentiation capacity of the scaffold on MC3T3-E1 cells was evaluated through alizarin red staining, alkaline phosphatase (ALP) detection, immunofluorescence experiments, and RT-qPCR assays. Results: The prepared scaffold possesses a three-dimensional network structure, and with an increase in the quantity of ß-TCP, more ß-TCP particles adhere to the scaffold surface. The compressive strength of PLA/ß-TCP scaffolds exhibits a trend of initial increase followed by decrease with an increasing amount of ß-TCP, reaching a maximum value of 52.1 MPa at a 10% ß-TCP content. Degradation rate curve results indicate that with the passage of time, the degradation rate of the scaffold gradually increases, and the pH of the scaffold during degradation shows an alkaline tendency. Additionally, Live/dead staining and blood compatibility experiments suggest that the prepared PLA/ß-TCP scaffold demonstrates excellent biocompatibility. CCK-8 experiments indicate that the PLA/ß-TCP group promotes cell proliferation, and the prepared PLA/ß-TCP scaffold exhibits a significant ability to enhance the osteogenic differentiation of MC3T3-E1 cells in vitro. Discussion: 3D printed LCD photocuring PLA/ß-TCP scaffolds could improve surface bioactivity and lead to better osteogenesis, which may provide a unique strategy for developing bioactive implants in orthopedic applications.

Complications With Demineralized Bone Matrix, Hydroxyapatite and Beta-Tricalcium Phosphate in Single and Two-Level Anterior Cervical Discectomy and Fusion Surgery.

STUDY DESIGN: Systematic literature review. OBJECTIVES: To analyze the evidence available reporting complications in single or two-level anterior cervical discectomy and fusion (ACDF) using a demineralized bone matrix (DBM), hydroxyapatite (HA), or beta-tricalcium phosphate (ß-TCP). METHODS: A systematic review of the literature using PubMed, EMBASE, Cochrane Library, and ClinicalTrials.gov databases was performed in August 2020 to identify studies reporting complications in one or two-level ACDF surgery using DBM, HA, or ß-TCP. The study was reported following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. RESULTS: A total of 1857 patients were included, 981 male and 876 female, across 17 articles; 5 prospective, and 12 retrospectives. We noted heterogeneity among the included studies concerning the study design and combination of graft materials utilized in them. However, we noted a higher incidence of adjacent segment disease (17.7%) and pseudoarthrosis (9.3%) in fusion constructs using DBM. Studies using ß-TCP reported a higher incidence of pseudoarthrosis (28.2%) and implant failures (17.9%). CONCLUSIONS: Degenerative cervical conditions treated with one or two-level ACDF surgery using DBM, HA, or ß-TCP with or without cervical plating are associated with complications such as adjacent segment disease, dysphagia, and pseudarthrosis. However, consequent to the study designs and clinical heterogeneity of the studies, it is not possible to correlate these complications accurately with any specific graft material employed. Further well-designed prospective studies are needed to correctly know the related morbidity of each graft used for achieving fusion in ACDF.

Effects of liquid-to-solid ratio and gamma irradiation on the rheology and cytocompatibility of a beta-tricalcium phosphate-based injectable bone substitute.

Injectable bone substitute (IBS) materials are commonly used to fill irregular-shaped bone voids in non-load-bearing areas and can offer greater utility over those which are in prefabricated powder, granule, or block forms. This work investigates the impact of liquid-to-solid ratio (LSR) on the rheology and cytocompatibility of IBSs formulated from bioactive glass particles and ß-tricalcium phosphate (ß-TCP) in glycerol and poly(ethylene glycol) (PEG). IBS formulations of varying LSR were prepared and packed in 3 cc open-bore syringes and sterilized via gamma irradiation (10 kGy, 25 kGy). Gamma-irradiated formulations with high PEG content required the highest (73 N) mechanical force for injection from syringes. Oscillatory viscosity measurements revealed that the viscosity of samples was directly proportional to glycerol content. PEG and glycerol displayed competing effects on the washout resistance and cohesiveness of samples, which were based on total weight loss in media and Ca2+ ion release, respectively. Cell viability in 24-h extracts of 10 kGy gamma-sterilized and 25 kGy gamma-irradiated samples were 22.94% and 56.53%, respectively. The research highlights the complex interplay of IBS components on IBS rheology and, moreover, the cytotoxicity behaviors of beta-tricalcium phosphate-based injectable bone substitutes by in vitro experiments.

3D-printed polycaprolactone scaffolds coated with beta tricalcium phosphate for bone regeneration.

BACKGROUND/PURPOSE: 3D-printing technology is an important tool for the bone tissue engineering (BTE). The aim of this study was to investigate the interaction of polycaprolactone (PCL) scaffolds and modified mesh PCL coated with beta TCP (PCL/ß-TCP) scaffolds with MG-63. METHODS: This study used the fused deposition modeling (FDM) technique with the 3D printing technique to fabricate the thermoplastic polymer and composite scaffolds. Scaffold structure and coating quality were observed under a scanning electron microscope (SEM). MG-63 cells were injected and attached to the mesh-manufactured PCL scaffolds. The biocompatibility of mesh structured PCL and PCL/ß-TCP scaffolds could be examined by measuring the viability of MG-63 cells of MTT assay. Bone cell differentiation was evaluated ALP activity by mineralization assay. RESULTS: The results showed that both mesh PCL scaffolds and PCL/ß-TCP scaffolds were non-toxic to the cells. The ALP activities of cells in PCL/ß-TCP scaffolds groups were significant differences and better than PCL groups in all groups at all experimental dates. The mineralization process was time-dependent, and significantly higher mineralization of osteosarcoma cells was observed on PCL/ß-TCP scaffolds at experimental dates. CONCLUSION: We concluded that both meshes structured PCL and PCL/ß-TCP scaffolds could promote the MG-63 cell growth, and PCL/ß-TCP was better than the PCL scaffolds for the outcome of MG63 cell differentiation and mineralization.

A comparative evaluation of the effect of alcoholic and non alcoholic beverages on tooth enamel surface pretreated with ß-tricalcium phosphate, bioactive glass and amine fluoride: an in vitro study.

Background and aims: The aim of this in vitro study is to quantitatively evaluate the effect of different alcoholic and non alcoholic beverages on the tooth enamel surface topography pretreated with various remineralizing agents using Atomic Force Microscopy. Methods: 120 tooth specimens were prepared from 60 freshly extracted intact human premolars by sectioning from mesial to distal surfaces using low speed diamond discs and were randomly assigned to study groups and control group. Specimens of Group I, Group II and Group III were pre-treated with ß-Tri calcium phosphate, bioactive glass and amine fluoride respectively for 4 minutes for 28 days, followed by storage in artificial saliva. All the specimens were evaluated for surface roughness using Atomic Force Microscopy. The specimens were then placed in alcoholic and non-alcoholic beverages for 10 minutes for 4 days and were again analyzed by Atomic Force Microscopy.Descriptive statistics was performed by using the proportional or frequency distribution of the parameters. The respondents were then grouped according to the branch of specialty if any and the data was evaluated by the one-way ANOVA with post-hoc, with p value <0.005. Results: In the present study, among the remineralizing agents tested, bioactive glass was found to be more effective than ß-Tri Calcium Phosphate and Amine Fluoride. Among the demineralizing agents used in this study, the demineralization potential of Coca Cola was found to be highest, followed by wine and green tea pretreated with ß-tricalcium phosphate, bioactive glass and amine fluoride. Conclusions: The present study concluded that all the remineralizing agents tested were found to be effective in inhibiting the demineralization caused by various alcoholic and non alcoholic beverages. Among the remineralizing agents tested, bioactive glass was found to be more effective than ß-tri calcium phosphate and amine fluoride.

Physicochemical Characterization of Novel Biomaterial Consisting of Biphasic Calcium Phosphate, Chitosan, Casein and Ethanolic Leaves Extract of Ormocarpum Cochinchinense.

Background: Bioceramics are widely used as a biomaterial to promote bone regeneration. Bone defect management requires the placement of bone grafts. Though there are many bone grafts available, these have certain limitations like limited supply and second surgical site morbidity. Phytochemicals in plants are known to have bone regeneration capacity and are used in traditional medicine for bone fracture healing. Objective: The purpose of the study was to create a novel biomaterial consisting of a composite of biphasic calcium phosphate (BCP), chitosan (CH), casein (CA), and ethanolic leaves extract of Ormocarpum Cochinchinense (OC) fabricated and characterized for physicochemical properties. Materials and Methods: BCP-CH-CA-OC material was prepared and immersed in Simulated body fluid (SBF) for 21 days. Physical properties were analysed through X-Ray diffraction (XRD), Fourier Transform Spectroscopy (FTIR), and Scanning Electron Microscopy with Energy dispersion spectroscopy (SEM/EDS). Mechanical properties were analysed by compressive strength and diametral tensile strength tests. Using BET (Brunauer-Emmett-Teller) analysis and Nano computed tomography (CT) scan, porosity measurements were made. Results: XRD did not show any significant change after immersion in SBF, indicating that the material was not under change and is stable. FTIR showed an increase in chitosan content, due to the loss of casein. SEM analysis showed the deposition of crystals and porous structure. EDS showed the deposition of minerals. Nano CT and BET analysis showed clinically significant porosity of 30%. Conclusion: The mechanical and physical properties of this novel biomaterial could be used in tissue engineering for the repair of bone defects in non-load-bearing areas. The physicochemical properties are at par with other materials used for the purpose of bone grafting. The novel biomaterial has the potential to be used in bone regenerative medicine in non-load-bearing applications.

Pretreatment of Mesenchymal Stem Cells with Electrical Stimulation as a Strategy to Improve Bone Tissue Engineering Outcomes.

Electrical stimulation (EStim), whether used alone or in combination with bone tissue engineering (BTE) approaches, has been shown to promote bone healing. In our previous in vitro studies, mesenchymal stem cells (MSCs) were exposed to EStim and a sustained, long-lasting increase in osteogenic activity was observed. Based on these findings, we hypothesized that pretreating MSC with EStim, in 2D or 3D cultures, before using them to treat large bone defects would improve BTE treatments. Critical size femur defects were created in 120 Sprague-Dawley rats and treated with scaffold granules seeded with MSCs that were pre-exposed or not (control group) to EStim 1 h/day for 7 days in 2D (MSCs alone) or 3D culture (MSCs + scaffolds). Bone healing was assessed at 1, 4, and 8 weeks post-surgery. In all groups, the percentage of new bone increased, while fibrous tissue and CD68+ cell count decreased over time. However, these and other healing features, like mineral density, bending stiffness, the amount of new bone and cartilage, and the gene expression of osteogenic markers, did not significantly differ between groups. Based on these findings, it appears that the bone healing environment could counteract the long-term, pro-osteogenic effects of EStim seen in our in vitro studies. Thus, EStim seems to be more effective when administered directly and continuously at the defect site during bone healing, as indicated by our previous studies.

Efficacy and Safety of Beta-Tricalcium Phosphate/Polylactic-Co-Glycolic Acid for Implantation of Bone Defects.

INTRODUCTION: Bone defects are often observed after surgery for fractures and bone tumors. Their treatment is technically difficult and sometimes results in negative clinical and economic outcomes. To repair bone defects, a bone graft is implanted by selecting a transplant material from an autologous or artificial bone. Each method has its advantages and disadvantages. Compared to the gold standard of autologous bone graft, bone graft substitutes are not limited by the amount of harvested graft and avoid complications at the donor site. ORB-03 is a new cotton-like bone graft substitute composed of beta-tricalcium phosphate (ß-TCP) and a bioabsorbable polymer, polylactic-co-glycolic acid (PLGA). ORB-03 is easy to mold and can fill various bone defect shapes, and its three-dimensional microfiber scaffold can enhance the differentiation of osteoblasts and promote osteogenesis. We investigated the efficacy, ease of handling, and safety of ORB-03 as a bone graft substitute. A multicenter, open-label, single-group study was conducted at six institutions. METHODS: Between July 2018 and August 2019, 60 patients with bone defects caused by fracture, benign tumors, or an iliac donor site from bone harvesting were enrolled in this study; 54 patients were finally included for the safety analysis and 48 patients for the image analysis. During surgery, ORB-03 was mixed with the patient's blood and molded into a bone defect. To evaluate the efficacy of ORB-03, radiography and computed tomography (CT) were performed at intervals until 24 weeks after surgery. RESULTS: The effective rate and its accurate bilateral 95% confidence interval (CI) were calculated based on the efficacy criteria at 24 weeks postoperatively. The ease with which ORB-03 could be handled in surgery was evaluated. Adverse events that occurred after surgery were evaluated, and those associated with ORB-03 were examined. Bone fusion was good in all cases, and the radiography and CT effective rates were 100.0% and 91.5%, respectively. Handling was easy in all cases. There were four adverse events, none of which were clinically problematic. CONCLUSIONS: ORB-03 was found to be easy to handle, safe, and effective as a bone graft substitute for bone defects.

Osseointegration of photodynamic active biomaterials for bone regeneration in an animal bone model over a period of 12 months.

OBJECTIVES: Previous efforts led to the development of two different polymeric biomaterials for periodontal regeneration with antibacterial photodynamic surface activity. The present study aimed to investigate osseointegration and bone formation of both materials in an ovine model. METHODS: Both biomaterials: 1) urethane dimethacrylate-based Biomaterial 1 (BioM1) and 2) tri-armed oligoester-urethane methacrylate-based Biomaterial 2 (BioM2) are enriched with beta-tri-calcium phosphate and the photosensitizer meso-tetra(hydroxyphenyl)chlorin (mTHPC). These materials were implanted in non-critical size bone defects in the sheep femur (n = 16) and tibia (n = 8). Empty defects served as controls (n = 16). Polyfluorochrome sequential bone labeling was carried out at baseline and after 3, 6, and 12 months. Animals were sacrificed after 12 months. Bone specimens (n = 40) were fixed and subjected to microtomographic analysis (µCT) for the evaluation of the bone-volume-fraction (BV/TV), trabecular number and trabecular thickness. Subsequently, histological sections were arranged and polyfluorochrome sequential bone labeling was analyzed by confocal laser scanning microscopy (cLSM). RESULTS: cLSM analysis revealed that highest remodeling and bone formation activity occurred during the second half of the study period (6-12 months). Bone formation in the tibia was significantly lower for the control (2.71 ± 1.26%) as compared to BioM1 (6.01 ± 2.99%) and BioM2 (6.45 ± 2.12%); (p = 0.006, p = 0004). Micro-computed tomography revealed a BV/TV volume fraction of 44.72 ± 9.01% in femur defects filled with BioM1 which was significantly higher compared to the control (32.27 ± 7.02%; p = 0.01). Bone architecture (trabecular number, trabecular thickness) did not significantly differ from the self-healed defects. SIGNIFICANCE: Both biomaterials, especially BioM1 showed good osseointegration and bone formation characteristics and can be recommended for further examination in periodontal regeneration studies.

Platelet-Rich Fibrin-Enhanced Bone Healing Co-grafted With Either Hydroxyapatite and Beta Tricalcium Phosphate or Demineralized Freeze-Dried Bone in Small Maxillofacial Osseous Defects: A Clinical Comparison.

INTRODUCTION: This study was conducted to clinically compare a commercially available combination of 70:30 nanocrystalline hydroxyapatite (HA) and beta tricalcium phosphate (ßTCP) along with platelet-rich fibrin (PRF) with demineralized freeze-dried bone (DFDB) grafts along with PRF in small maxillofacial osseous defects. MATERIALS AND METHODS: Thirty patients with one osseous defect were randomly distributed into two groups of 15 each: Group A and Group B. Group A patients received HA+ßTCP+PRF while Group B received DFDB + PRF. Postoperative pain, swelling, wound dehiscence, and the presence or absence of infection were evaluated at various intervals up to seven postop days and compared between the two groups and within either group. A technetium 99m methylene diphosphonate (MDP 99mTc) scan was also done for a representative patient of either group at the end of three months to evaluate the fate of the graft. RESULTS: We found no significant difference between the two groups for any of our parameters. Significant improvements were noted for pain and swelling within either group at various intervals. The MDP 99mTc scan showed increased tracer uptake for the representing patient of either group. CONCLUSIONS: HA+ßTCP is more inexpensive than DFDB and more readily available and has no host incompatibility or infection potential, resulting in similar clinical postoperative states as DFDB when either is used with PRF.

Bicalcium Phosphate as an Asset in Regenerative Therapy.

After a loss of a tooth, alveolar bone resorption is immutable, leaving the area devoid of sufficient bone quality and mass for a successful and satisfactory implant or any other dental treatment. To treat this problem of irreversible bone loss, bone grafting is the primary solution and a well-accepted technique. The use of bone grafting procedures has increased in recent years. This review is about the various bone grafting techniques and best-situated material available currently along with their trump cards and limitations. In the thorough discussion regarding bone grafting materials and their substitutes, one alloplastic material has shown unbeaten and the most satisfactory properties than any other material, "bicalcium phosphate" (BCP). BCP is a mixture of hydroxyapatite (HA) and beta-tricalcium phosphate (B-TCP) usually obtained through sintering calcium-deficient apatite (CDA) at or above 700°C or by other methods such as hydrolysis or precipitation. The review also shows comparative studies done to understand the effect, most adequate balance, and impact of ratios of HA/B-TCP on the properties, structure, and success rate of this material. The objective of the review is to enlighten the principal characteristic of the most likely used bone graft material presently, i.e., BCP. The most impeccable characteristic of BCP is its capability to osteointegrate, which results in a superior interface. This interface depicts a dynamic process that includes physicochemical reactions, crystal-protein interactions, cell and tissue colonization, and bone remodeling. BCP has certain essential properties that could be put forth as its advantage over any other substitute. These properties include bioactivity, osteointegration, osteoinduction, osteogenesis, and biodegradation, which are mostly governed by modifying the HA/B-TCP ratio. Other applications of BCP are feasible, such as in drug administration and scaffolds for tissue engineering.

The use of a new grafting material (b.Bone™) for the management of severely depressed tibial plateau fractures: Preliminary report of three cases.

Tibial plateau fractures are often complex injuries that result from high-energy trauma affecting the articular congruity of the knee. Managing tibial plateau fractures can be challenging because of severe depression of the subchondral cancellous bone and concomitant cartilage injury. Bone substitutes are commonly used to fill such defects as part of the surgical treatment of tibial plateau fractures. We describe three cases of tibial plateau fractures managed with a synthetic bone substitute (b.Bone™, GreenBone ORTHO S.p.A Faenza, Italy) with a highly interconnected and porous 3D structure to mimic the hierarchical architecture and morphology of natural human bone.

Improving Oral Health with Fluoride-Free Calcium-Phosphate-Based Biomimetic Toothpastes: An Update of the Clinical Evidence.

As the demand for clinically effective fluoride-free oral care products for consumers increases, it is important to document which types of toothpastes have been shown in clinical studies to be effective in improving oral health. In this review, we included different indications, i.e., caries prevention, improving periodontal health, reducing dentin hypersensitivity, protecting against dental erosion, and safely improving tooth whitening in defining what constitutes improvement in oral health. While there are several professional and consumer fluoride-containing formulations fortified with calcium-phosphate-based ingredients, this review focuses on fluoride-free toothpastes containing biomimetic calcium-phosphate-based molecules as the primary active ingredients. Several databases were searched, and only clinical trials in human subjects were included; in vitro and animal studies were excluded. There were 62 oral health clinical trials on biomimetic hydroxyapatite (HAP), 57 on casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), 26 on calcium sodium phosphosilicate (CSPS, or so called Bioglass), and 2 on ß-tricalcium phosphate (ß-TCP). HAP formulations were tested the most in clinical trials for benefits in preventing caries, dentin hypersensitivity, improving periodontal health, and tooth whitening. Based on the current clinical evidence to date, fluoride-free HAP toothpaste formulations are the most versatile of the calcium phosphate active ingredients in toothpastes for improving oral health.

Fusion rate of Escherichia coli-derived recombinant human bone morphogenetic protein-2 compared with local bone autograft in posterior lumbar interbody fusion for degenerative lumbar disorders.

BACKGROUND CONTEXT: The use of recombinant human bone morphogenetic proteins-2 (rhBMP-2) for spinal fusion has been reported to be effective. However, most studies have focused on posterolateral and anterior lumbar interbody fusion, and few have investigated posterior lumbar interbody fusion (PLIF). PURPOSE: This study aimed to determine the effectiveness and safety of the delivery of Escherichia coli-derived rhBMP-2 (E.BMP-2) with hydroxyapatite (HA) and ß-tricalcium phosphate (ß-TCP) poloxamer hydrogel composite carriers for PLIF. STUDY DESIGN: A retrospective study. PATIENT SAMPLE: Patients who underwent 1 to 3 levels of PLIF for lumbar degenerative disc disorders between 2015 and 2020 with a follow-up of ≥1 year were enrolled. In total, 254 patients (357 levels) were included in the analysis. The evaluation was performed at each segment level. In the E.BMP-2 group, 160 patients (221 levels) received autologous local bone with E.BMP-2 (maximum 0.5 mg/level), and in the control group, 94 patients (136 levels) received only local bone graft. OUTCOME MEASURES: The primary outcome of this study was to compare the X-ray and CT fusion rates between the two groups. Secondary outcomes included analysis of the patients' clinical outcomes and postoperative complications on CT scans. METHODS: Clinical evaluations were performed using a visual analog scale for back pain, the Oswestry Disability Index for disability, and physical and mental component summaries of the Short Form 36-Item Form Health Survey to assess functional effects and quality of life. The fusion was evaluated using radiography and CT. On radiography, solid fusion was defined when the difference between extension and flexion was less than 5°. On CT, solid fusion was defined when the upper and lower vertebral bodies were connected by the trabecular bone (bone bridge formation). In addition, complications such as osteolysis, cage subsidence, and screw loosening were investigated using CT. RESULTS: All clinical results for low back pain, disability, and quality of life in both groups were excellent and showed statistically significant improvements compared with baseline (p<.0001). According to the X-ray evaluations, fusion was achieved in 92.31% (204/221) of the patients in the E.BMP-2 group and 82.35% (112/136) of the patients in the control group (p=.0041). According to the CT evaluations, the fusion rates were 93.21% (206/221) and 88.24% (120/136) in the E.BMP-2 and control groups (p=.1048), respectively. Except for screw loosening, which had a significantly higher incidence in the control group (p=.0014), the rates of most postoperative complications were not significantly different between the groups. CONCLUSIONS: This study demonstrated that the adjunctive use of a low dose of E.BMP-2 with HA and ß-TCP hydrogel can effectively promote bone fusion, making it a promising option for patients with limited autograft availability or compromised bone quality in PLIF.

Efficacy of pure beta tricalcium phosphate graft in dentoalveolar surgery: a retrospective evaluation based on serial radiographic images.

BACKGROUND: The use of beta-tricalcium phosphate (beta-TCP) in dental surgery is limited owing to its rapid absorption compared to mixed formulations of hydroxyapatite. However, newly developed pure beta-TCP crystals have demonstrated slow absorption; hence, they last longer within the defect and act as a scaffold until new bone formation. The oral environment is unique and can prove unfavorable for bone grafts due to the high infection rate in the oral cavity and the fragile condition of the oral mucosa. The aim of this study was to evaluate the feasibility of using pure beta-TCP bone grafts in various dental treatments. METHODS: Panoramic X-ray images of 25 patients who underwent bone grafting during dental surgery were analyzed. A specially treated pure beta-TCP crystal, Neo Bone® (Neo Bone®, SN Biologics Co., Ltd, Seoul, Korea), was used in this study. The bone density at the graft site was compared with that of the surrounding bone using the ImageJ software (Wayne Rasband, NIH USA). RESULTS: Six months after surgery, the bone graft density was similar to that of the surrounding bone in 20 patients and increased in 5 patients. No adverse effects, such as infection, dehiscence, or graft failure, were observed. CONCLUSION: The newly developed pure beta-TCP crystal was slowly absorbed and served as support until new bone formation at the defect site, thus demonstrating its potential for use in various oral conditions requiring bone grafting.

Ionized Jet Deposition of Calcium Phosphates-Based Nanocoatings: Tuning Coating Properties and Cell Behavior by Target Composition and Substrate Heating.

Calcium phosphate-based coatings are widely studied in orthopedics and dentistry for their similarity to the mineral component of bone and their capability to promote osseointegration. Different calcium phosphates have tunable properties that result in different behaviors in vitro, but the majority of studies focus only on hydroxyapatite. Here, different calcium phosphate-based nanostructured coatings are obtained by ionized jet deposition, starting with hydroxyapatite, brushite and beta-tricalcium phosphate targets. The properties of the coatings obtained from different precursors are systematically compared by assessing their composition, morphology, physical and mechanical properties, dissolution, and in vitro behavior. In addition, for the first time, depositions at high temperature are investigated for the further tuning of the coatings mechanical properties and stability. Results show that different phosphates can be deposited with good composition fidelity even if not in a crystalline phase. All coatings are nanostructured and non-cytotoxic and display variable surface roughness and wettability. Upon heating, higher adhesion and hydrophilicity are obtained as well as higher stability, resulting in better cell viability. Interestingly, different phosphates show very different in vitro behavior, with brushite being the most suitable for promoting cell viability and beta-tricalcium phosphate having a higher impact on cell morphology at the early timepoints.

Comparison of Particulate, Block and Putty Forms of ß-tricalcium Phosphate-Based Synthetic Bone Grafts on Rat Calvarium Model.

Purpose: Bone augmentation is a necessity for atrophied alveolar ridge prior to dental implant placement. Various bone graft types and forms with different characteristics are available in the market for alveolar augmentation. Beta tricalcium phosphate (ß-TCP) is a synthetic biomaterial known as the oldest type of calcium phosphate. Studies comparing particulate, block or putty grafts are very limited. The aim of this study was to compare the particulate, block and putty forms of the same ß-TCP bone graft and analyze the efficiency in critical size calvarium defects. Material and Methods: Twenty male Wistar-Albino rats were employed for the study. Four bicortical bone defects with 5 mm diameter were created on each rat calvarium, and three defects were filled with particulate, block or putty ß-TCP graft and one defect was left empty. The animals were killed after 8 weeks. New bone formation, residual graft, loose connective tissue, condensed mesenchyme, alkaline phosphatase, proliferating cell nuclear antigen, osteocalcin were measured on the specimens. Results: Compared to block and putty forms, significantly higher new bone formation and least residual graft were observed in the particulate graft group. The residual graft was significantly higher in the block graft group than both the particulate and the putty groups. The cellular immunoreactivity of the samples in the particulate graft group was significantly higher. There was no significant difference between putty and block graft groups. Conclusion: Bone regeneration is significantly affected by the form of ß-TCP bone graft, and the particulate form was the most successful in our study.

Injectable Synthetic Beta-Tricalcium Phosphate/Calcium Sulfate (GeneX) for the Management of Contained Defects Following Curettage of Benign Bone Tumours.

Benign and low-grade malignant bone tumours are often treated with curettage and filling of the resultant defect using any of a number of materials, including autologous bone grafts, allografts, or synthetic materials. The objective of this study was to report our experience using a synthetic bone graft substitute in these patients. Ten consecutive cases (four males, six females; mean age, 36 years) of benign bone tumours were treated surgically at a tertiary musculoskeletal oncology centre, between 2019 and 2021. Following curettage, the contained defects were managed with injectable beta-tricalcium phosphate/calcium sulfate (GeneX; Biocomposites Ltd., Keele, UK). The desired outcomes were early restoration of function and radiographic evidence of healing. No other graft materials were used in any of the patients. The mean follow-up was 24 months (range, 20-30 months). All patients in this series (100%) demonstrated radiographic evidence of healing and resumed their daily living activities. There were no tumour recurrences and no complications were encountered with the use of GeneX. In patients with contained defects following curettage of benign bone tumours, we found GeneX to be a safe and effective filling agent. These findings contrast with some existing studies that have reported local complications with the use of injectable beta-tricalcium phosphate/calcium sulfate.

Three-dimensional-printed MPBI@ß-TCP scaffold promotes bone regeneration and impedes osteosarcoma under near-infrared laser irradiation.

Beta-tricalcium phosphate (ß-TCP) is considered as one of the most promising biomaterials for bone reconstruction. This study generated a functional molybdenum disulfide (MoS2 )/polydopamine (PDA)/-bone morphogenetic protein 2 (BMP2)-insulin-like growth factor-1 (IGF-1) coating on the ß-TCP scaffold and analyzed the outcomes. The MoS2 /PDA-BMP2-IGF-1@ß-TCP (MPBI@ß-TCP) scaffold was prepared by 3D printing and physical adsorption, followed by characterization to validate its successful construction. The in vitro osteogenic effect of the MPBI@ß-TCP scaffold was evaluated. It was found that MPBI@ß-TCP augmented the adhesion, diffusion and proliferation of mesenchymal stem cells (MSCs). The alkaline phosphatase (ALP) activity, collagen secretion and extracellular matrix (ECM) mineralization along with the expression of Runx2, ALP and OCN were also enhanced in the presence of MPBI@ß-TCP. Additionally, MPBI@ß-TCP stimulated endothelial cells to secrete VEGF and promoted capillary-like tubule formation. We then confirmed the biocompatibility of MPBI@ß-TCP to macrophages and its anti-inflammatory effects. Furthermore, under near-infrared (NIR) laser irradiation, MPBI@ß-TCP produced photothermal effect to not only kill MG-63 osteosarcoma cells, but also enhance bone regeneration in vivo with biosafety. Overall, this work demonstrates that 3D-printed MPBI@ß-TCP with enhanced osteogenic activity under NIR laser irradiation has a vast potential in the field of tissue defects.